3kg Payload Collaborative Robot Arm Robotic ya Khofi

Kufotokozera Kwachidule:

SCIC Z-Arm 2142 idapangidwa ndi SCIC Tech, ndi loboti yopepuka yogwirizana, yosavuta kuyikonza ndikugwiritsa ntchito, yothandizira SDK. Kuphatikiza apo, ndikuzindikira kugunda komwe kumathandizidwa, ndiko kuti, zitha kukhala zodziwikiratu kuyimitsa mukakhudza munthu, komwe ndi kulumikizana kwanzeru pamakina amunthu, chitetezo ndichokwera.


  • Z axis stroke:210mm (msinkhu akhoza makonda)
  • Liwiro la mzere:1220mm/s (katundu 2kg)
  • Kubwereza:± 0.03mm
  • Malipiro okhazikika:2kg pa
  • Malipiro ochuluka:3kg pa
  • Tsatanetsatane wa Zamalonda

    Zolemba Zamalonda

    3kg Payload Collaborative Robot Arm Robotic ya Khofi

    Gulu lalikulu

    Mkono wa loboti wamafakitale / Mkono wa loboti wothandizana / Wogwirizira magetsi/Ntelligent actuator/Automation solutions

    Tikubweretsa kupambana kwathu kwa 3kg payload cobot mkono, yankho labwino pazosowa zanu zonse zamafakitale. Ndi mawonekedwe ake apamwamba komanso ukadaulo wotsogola, mkono wa robotic wa ma axis anayiwu usintha momwe mumagwirira ntchito.

    Mikono yathu ya cobot ili ndi mawonekedwe apamwamba kwambiri kuti athe kusinthasintha mwapadera komanso kusinthasintha. Mapangidwe ake a ma axis anayi amathandizira kusuntha kolondola, kogwira mtima, ndikupangitsa kuti ikhale yabwino pazogwiritsa ntchito zosiyanasiyana kuphatikiza ntchito zosankha ndi malo, ntchito za mzere wa msonkhano ndi zina zambiri. Kaya mukufuna kukweza, kuyika, kusanja kapena kunyamula zinthu, mkono wa robotiwu wakuphimbani.

    Zopangidwa ndi chitetezo m'maganizo, manja athu a cobot ndi njira yothandizana nayo yomwe ingagwire ntchito limodzi ndi anthu ogwira ntchito popanda kufunikira kwa zotchinga zachitetezo. Ili ndi masensa apamwamba komanso mapulogalamu omwe amatha kuzindikira ndikupewa zopinga zilizonse, kuwonetsetsa malo ogwirira ntchito otetezeka kwa aliyense amene akukhudzidwa. Sikuti mawonekedwe ogwirizanawa amangowonjezera zokolola, komanso amatha kuphatikizidwa mosavuta ndimayendedwe anu omwe alipo.

    Maloboti athu opanga zida za 4-axis adapangidwa mwapadera kuti akwaniritse zofunikira zamakampani amakono. Zimapangidwa ndi zipangizo zamtengo wapatali zomwe zimatsimikizira kulimba komanso kugwira ntchito kwa nthawi yaitali. Ndi mawonekedwe ake olimba, mkono wa loboti umatha kunyamula katundu wolemera mpaka 3 kg, ndikupangitsa kuti ikhale yabwino kwamitundu yosiyanasiyana yamafakitale.

    Mikono yathu yosankha ndikuyika imakhala ndi mapulogalamu apamwamba omwe amatha kukonzedwa mosavuta kuti agwire ntchito zovuta. Mawonekedwe ake mwachilengedwe apulogalamu amalola kuti pakhale pulogalamu yachangu, yopanda msoko, ngakhale kwa iwo omwe alibe luso la robotics. Mawonekedwe osavuta awa amaonetsetsa kuti ntchitoyo ikuyenda bwino komanso yothandiza, kukhathamiritsa zokolola komanso kuchepetsa nthawi yopumira.

    Mwachidule, manja athu a robotic 4-axis ndi osintha masewera pagawo la makina opanga mafakitale. Ndi mphamvu zake zolipirira zochititsa chidwi, kuthekera kwa mgwirizano komanso luso lapamwamba la mapulogalamu, limapereka kusinthasintha kosagwirizana ndi magwiridwe antchito. Kwezani mzere wanu wopanga lero ndikuwona mphamvu ya mkono wathu wa 3kg wolipira.

    Kugwiritsa ntchito

    SCIC Z-Arm cobots ndi maloboti ogwirizana a 4-axis opepuka okhala ndi mota yomangidwa mkati, ndipo safunanso zochepetsera ngati mabala ena achikhalidwe, kuchepetsa mtengo ndi 40%. Ma cobots a SCIC Z-Arm amatha kuzindikira ntchito kuphatikiza koma osachepera kusindikiza kwa 3D, kasamalidwe ka zinthu, kuwotcherera, ndi kujambula kwa laser. Imatha kuwongolera kwambiri magwiridwe antchito komanso kusinthasintha kwa ntchito yanu ndi kupanga.

    Mawonekedwe

    mkono wogwirizana wa robotic 2442

    Kulondola Kwambiri
    Kubwerezabwereza
    ± 0.03mm

    Kulipira kwakukulu
    3kg pa

    Chigawo Chachikulu cha Arm
    JI axis 220mm
    J2 axis 200mm

    Mtengo Wopikisana
    Makhalidwe apamwamba a mafakitale
    Cmtengo wotsika

    Specification Parameter

    SCIC Z-Arm 2142 idapangidwa ndi SCIC Tech, ndi loboti yopepuka yogwirizana, yosavuta kuyikonza ndikugwiritsa ntchito, yothandizira SDK. Kuphatikiza apo, ndikuzindikira kugunda komwe kumathandizidwa, ndiko kuti, zitha kukhala zodziwikiratu kuyimitsa mukakhudza munthu, komwe ndi kulumikizana kwanzeru pamakina amunthu, chitetezo ndichokwera.

    Z-Arm 2142E Collaborative Robot mkono

    Parameters

    1 kutalika kwa mkono wa axis

    220 mm

    1 axis mozungulira angle

    ±90°

    2 kutalika kwa mkono wa axis

    200 mm

    2 axis mozungulira angle

    ± 164 °

    Z axis stroke

    210 Kutalika kumatha kusinthidwa makonda

    Mtundu wozungulira wa R axis

    ± 1080 °

    Liniya liwiro

    1220mm/s (katundu 2kg)

    Kubwerezabwereza

    ± 0.03mm

    Malipiro okhazikika

    2kg pa

    Malipiro apamwamba

    3kg pa

    Digiri ya ufulu

    4

    Magetsi

    220V/110V50-60HZ agwirizane ndi 24VDC pachimake mphamvu 500W

    Kulankhulana

    Efaneti

    Kukula

    Wowongolera wophatikizidwa wophatikizidwa amapereka 24 I/O + kukulitsa pansi pa mkono

    Z-axis imatha kusinthidwa makonda

    0.11m, 0.21m, 0.31m, 0.41m, 0.51m

    Z-axis kukoka maphunziro

    /

    Mawonekedwe amagetsi osungidwa

    Kukonzekera koyenera: 24 * 23awg (osatetezedwa) mawaya kuchokera pazitsulo zazitsulo kudzera pachivundikiro cham'munsi cha mkono

    Zosankha: 2 φ4 vacuum machubu kudzera pa socket panel ndi flange

    Zothandizira zamagetsi za HITBOT

    Z-EFG-8S/Z-EFG-12/Z-EFG-20/Z-EFG-20S/Z-EFG-30/Z-EFG-50, Fifth axis, 3D printing

    Kuwala kopumira

    /

    Kuyenda kwa mkono wachiwiri

    Standard: ± 164 ° Zosankha: 15-345deg

    Zosankha zowonjezera

    /

    Gwiritsani ntchito chilengedwe

    Kutentha kozungulira: 0-45°C

    Chinyezi: 20-80% RH (palibe chisanu)

    Kulowetsa kwa digito kwa I/O (kwawokha)

    9+3+kuwonjeza mkono wam'manja (posankha)

    Kutulutsa kwa digito kwa I/O (kwawokha)

    9+3+kuwonjeza mkono wam'manja (posankha)

    I/O doko lolowera analogi (4-20mA)

    /

    Kutulutsa kwa doko la I/O (4-20mA)

    /

    Kutalika kwa mkono wa robot

    566 mm

    Kulemera kwa mkono wa robot

    210mm sitiroko ukonde ukonde 18kg

    Kukula koyambira

    200mm*200mm*10mm

    Mtunda pakati pa mabowo okonzera m'munsi

    160mm * 160mm yokhala ndi zomangira zinayi za M8 * 20

    Kuzindikira kugunda

    Kokani maphunziro

    Motion Range M1 Version (Tembenukira Kunja)

    mkono wogwirizana wa robotic
    maloboti

    Chiyambi cha Chiyankhulo

    Z-Arm 2442 mawonekedwe a mkono wa robot amaikidwa m'malo a 2, mbali ya mkono wa robot (yotchedwa A) ndi kumbuyo kwa mkono wotsiriza. Mawonekedwe a A ali ndi mawonekedwe osinthira mphamvu (JI), mawonekedwe amagetsi a 24V DB2 (J2), otuluka kwa wogwiritsa ntchito I/O doko DB15 (J3), kulowetsa kwa ogwiritsa ntchito I/O doko DB15 (J4) ndi mabatani osinthira adilesi ya IP (K5). Doko la Efaneti (J6), doko lolowetsa / zotulutsa (J7), ndi sockets ziwiri za 4-core molunjika-kudzera mawaya J8A ndi J9A.

    Kusamalitsa

    1. Inertia yolipira

    Malo opatsa malipiro a mphamvu yokoka ndi kuchuluka kwa malipiro omwe amaperekedwa ndi Z axis movement inertia akuwonetsedwa pa Chithunzi 1.

    Industrial Robotic Arm - Z-Arm-1832 (6)

    Chithunzi 1 XX32 mndandanda wazomwe zimalipidwa

    2. Mphamvu zogundana
    Mphamvu yoyambitsa chitetezo chopingasa chopingasa: mphamvu ya mndandanda wa XX42 ndi 40N.

    3. Z-axis mphamvu yakunja
    Mphamvu yakunja ya Z axis siyenera kupitirira 120N.

    Industrial-Robotic-Arm-Z-Arm-1832-71

    Chithunzi 2

    4. Zolemba pa kukhazikitsa makonda a Z axis, onani Chithunzi 3 kuti mudziwe zambiri.

    Industrial Robotic Arm - Z-Arm-1832 (8)

    Chithunzi 3

    Chenjezo:

    (1) Kwa makonda a Z-axis okhala ndi sitiroko yayikulu, Kukhazikika kwa Z-axis kumachepa pomwe sitiroko ikuwonjezeka. Pamene sitiroko ya Z-axis iposa mtengo wovomerezeka, wogwiritsa ntchitoyo ali ndi zofunikira zolimba, ndipo liwiro ndi> 50% ya liwiro lalikulu, ndikulimbikitsidwa kwambiri kukhazikitsa chithandizo kumbuyo kwa Z-axis kuti muwonetsetse kuti kusasunthika kwa mkono wa robot umakwaniritsa zofunikira pa liwiro lalikulu.

    Mtengo wovomerezeka ndi uwu: Z-ArmXX42 mndandanda wa Z-axis stroke> 600mm

    (2) Pambuyo pa Z-axis stroke yawonjezeka, verticality ya Z-axis ndi maziko adzachepetsedwa kwambiri. Ngati zofunikira zowongoka za Z-axis ndi zoyambira sizikugwira ntchito, chonde funsani akatswiri payokha.

    5.Power chingwe chotentha-plugging choletsedwa. Chenjezo lobwerera mmbuyo pamene mitengo yabwino ndi yoipa ya magetsi achotsedwa.

    6. Osakanikiza pansi mkono wopingasa mphamvu ikazima.

    Industrial Robotic Arm - Z-Arm-1832 (9)

    Chithunzi 4

    DB15 Connector Malangizo

    Industrial Robotic Arm - Z-Arm-1832 (10)

    Chithunzi 5

    Mtundu womwe tikulimbikitsidwa: Wachimuna wokutidwa ndi golide wokhala ndi chipolopolo cha ABS YL-SCD-15M chachikazi chokhala ndi golide chokhala ndi chipolopolo cha ABS YL-SCD-15F

    Kukula Kufotokozera: 55mm * 43mm * 16mm

    (Onani chithunzi 5)

    Table ya Robot Arm Yogwirizana ndi Grippers

    Robot Arm Model No.

    Zogwirizana ndi Grippers

    XX42 T1

    Z-EFG-8S NK/Z-EFG-12 NK/Z-EFG-20 NM NMA/Z-EFG-20S/

    Z-EFG-30NM NMA Kusindikiza kwa 5th axis 3D

    XX42 T2

    Z-EFG-50 ALL/Z-EFG-100 TXA

    Chithunzi cha kukula kwa Adapter Yamagetsi

    XX42 kasinthidwe 24V 500W RSP-500-SPEC-CN magetsi

    Industrial Robotic Arm - Z-Arm-1832 (11)

    Chithunzi cha The External Use Environment of The Robot Arm

    Industrial Robotic Arm - Z-Arm-1832 (12)

    Bizinesi Yathu

    Industrial-Robotic-Arm
    Industrial-Robotic-Arm-grippers

  • Zam'mbuyo:
  • Ena:

  • Lembani uthenga wanu apa ndikutumiza kwa ife